[Tin đồn] PIC32MZ

[itx]

Mấy bữa nay thấy có tin đồn của mấy tay đi Masters 2013 về con này.



Có EBI (giao diện bộ nhớ bên ngoài?), microAptiv kec lõi @ 200MHz, DSP, MMU ,2MB Flash.....

Dự là tháng 10/2013 có mẫu.
Tung của đã rao bán sản phẩn dựa trên nó DTX Processing family expanding with two new members | Dimitech

Không biết thế nào, lót gạch hóng.

[eKhanhHoa]

Cho DUYPhi đặt ké 1 kit nếu đc. Đã làm PIC32MX, nói chung là rất OK

[herrtien]

PIC32MZ Embedded Connectivity (EC) Family
32-bit MCUs (up to 2 MB Live-Update Flash and 512 KB SRAM) with Audio and Graphics Interfaces, HS USB, Ethernet, and Advanced Analog.
Operating Conditions
•2.0V to 3.6V, -40ºC to +125ºC, DC to 200 MHz
Core: 200 MHz / 314 DMIPS microAptiv™
•16 KB I-Cache, 4 KB D-Cache
•MMU for optimum embedded OS execution
•microMIPS™ mode for up to 35% smaller code size
•DSP-enhanced core:
-Four 64-bit accumulators
-Single-cycle MAC, saturating and fractional math
•Code-efficient (C and Assembly) architecture
Clock Management
•0.9% internal oscillator
•Programmable PLLs and oscillator clock sources
•Fail-Safe Clock Monitor (FSCM)
•Independent Watchdog Timers (WDT) and Deadman Timer (DMT)
•Fast wake-up and start-up
Power Management
•Low-power modes (Sleep and Idle)
•Integrated Power-on Reset and Brown-out Reset
•200 μA/MHz dynamic current (typical)
Memory Interfaces
•50 MHz External Bus Interface (EBI)
•50 MHz Serial Quad Interface (SQI)
Audio and Graphics Interfaces
•Graphics interfaces: EBI or PMP
•Audio data communication: I2S, LJ, and RJ
•Audio control interfaces: SPI and I2C™
•Audio master clock: Fractional clock frequencies with USB synchronization
High-Speed (HS) Communication Interfaces
(with Dedicated DMA)
•USB 2.0-compliant High-Speed On-The-Go (OTG) controller
•10/100 Mbps Ethernet MAC with MII and RMII interface
Security Features
•Crypto Engine with a RNG for data encryption/decryption and authentication (AES, 3DES, SHA, MD5, and HMAC)
•Advanced memory protection:
-Peripheral and memory region access control
Direct Memory Access (DMA)
•Eight channels with automatic data size detection
•Programmable Cyclic Redundancy Check (CRC)
Advanced Analog Features
•12-bit ADC module:
-28 Msps with six Sample and Hold (S&H) circuits
-Up to 48 analog inputs
•Flexible and independent ADC trigger sources
•Two comparators with 32 programmable voltage references
•Temperature sensor with ±2ºC accuracy
Communication Interfaces
•Two CAN modules (with dedicated DMA channels):
-2.0B Active with DeviceNet™ addressing support
•Six UART modules (25 Mbps):
-Supports LIN 1.2 and IrDA® protocols
•Six 4-wire SPI modules (50 Mbps)
•SQI configurable as an additional SPI module (50 MHz)
•Five I2C modules (up to 1 Mbaud) with SMBus support
•Parallel Master Port (PMP)
•Peripheral Pin Select (PPS) to enable function remap
Timers/Output Compare/Input Capture
•Nine general purpose timers:
-Nine 16-bit and up to four 32-bit timers/counters
•Nine Output Compare (OC) modules
•Nine Input Capture (IC) modules
•PPS to enable function remap
•Real-Time Clock and Calendar (RTCC) module
Input/Output
•5V-tolerant pins with up to 32 mA source/sink
•Selectable open drain, pull-ups, and pull-downs
•External interrupts on all I/O pins
Qualification and Class B Support
•AEC-Q100 REVG (Grade 1 -40ºC to +125ºC) planned
•Class B Safety Library, IEC 60730
•Back-up internal oscillator
Debugger Development Support
•In-circuit and in-application programming
•4-wire MIPS® Enhanced JTAG interface
•Unlimited software and 12 complex breakpoints
•IEEE 1149.2-compatible (JTAG) boundary scan
•Non-intrusive hardware-based instruction trace
Integrated Software Libraries and Tools
•C/C++ compiler with native DSP/fractional support
•TCP/IP, USB, Graphics, and mTouch™ middleware
•MFi, Android™, and Bluetooth® audio frameworks
•μC/OS™, FreeRTOS™, and other popular RTOS kernels

[quanghuy_125]

PIC32MZ Embedded Connectivity (EC) Family
32-bit MCUs (up to 2 MB Live-Update Flash and 512 KB SRAM) with Audio and Graphics Interfaces, HS USB, Ethernet, and Advanced Analog.
Operating Conditions
•2.0V to 3.6V, -40ºC to +125ºC, DC to 200 MHz
Core: 200 MHz / 314 DMIPS microAptiv™
•16 KB I-Cache, 4 KB D-Cache
•MMU for optimum embedded OS execution
•microMIPS™ mode for up to 35% smaller code size
•DSP-enhanced core:
-Four 64-bit accumulators
-Single-cycle MAC, saturating and fractional math
•Code-efficient (C and Assembly) architecture
Clock Management
•0.9% internal oscillator
•Programmable PLLs and oscillator clock sources
•Fail-Safe Clock Monitor (FSCM)
•Independent Watchdog Timers (WDT) and Deadman Timer (DMT)
•Fast wake-up and start-up
Power Management
•Low-power modes (Sleep and Idle)
•Integrated Power-on Reset and Brown-out Reset
•200 μA/MHz dynamic current (typical)
Memory Interfaces
•50 MHz External Bus Interface (EBI)
•50 MHz Serial Quad Interface (SQI)
Audio and Graphics Interfaces
•Graphics interfaces: EBI or PMP
•Audio data communication: I2S, LJ, and RJ
•Audio control interfaces: SPI and I2C™
•Audio master clock: Fractional clock frequencies with USB synchronization
High-Speed (HS) Communication Interfaces
(with Dedicated DMA)
•USB 2.0-compliant High-Speed On-The-Go (OTG) controller
•10/100 Mbps Ethernet MAC with MII and RMII interface
Security Features
•Crypto Engine with a RNG for data encryption/decryption and authentication (AES, 3DES, SHA, MD5, and HMAC)
•Advanced memory protection:
-Peripheral and memory region access control
Direct Memory Access (DMA)
•Eight channels with automatic data size detection
•Programmable Cyclic Redundancy Check (CRC)
Advanced Analog Features
•12-bit ADC module:
-28 Msps with six Sample and Hold (S&H) circuits
-Up to 48 analog inputs
•Flexible and independent ADC trigger sources
•Two comparators with 32 programmable voltage references
•Temperature sensor with ±2ºC accuracy
Communication Interfaces
•Two CAN modules (with dedicated DMA channels):
-2.0B Active with DeviceNet™ addressing support
•Six UART modules (25 Mbps):
-Supports LIN 1.2 and IrDA® protocols
•Six 4-wire SPI modules (50 Mbps)
•SQI configurable as an additional SPI module (50 MHz)
•Five I2C modules (up to 1 Mbaud) with SMBus support
•Parallel Master Port (PMP)
•Peripheral Pin Select (PPS) to enable function remap
Timers/Output Compare/Input Capture
•Nine general purpose timers:
-Nine 16-bit and up to four 32-bit timers/counters
•Nine Output Compare (OC) modules
•Nine Input Capture (IC) modules
•PPS to enable function remap
•Real-Time Clock and Calendar (RTCC) module
Input/Output
•5V-tolerant pins with up to 32 mA source/sink
•Selectable open drain, pull-ups, and pull-downs
•External interrupts on all I/O pins
Qualification and Class B Support
•AEC-Q100 REVG (Grade 1 -40ºC to +125ºC) planned
•Class B Safety Library, IEC 60730
•Back-up internal oscillator
Debugger Development Support
•In-circuit and in-application programming
•4-wire MIPS® Enhanced JTAG interface
•Unlimited software and 12 complex breakpoints
•IEEE 1149.2-compatible (JTAG) boundary scan
•Non-intrusive hardware-based instruction trace
Integrated Software Libraries and Tools
•C/C++ compiler with native DSP/fractional support
•TCP/IP, USB, Graphics, and mTouch™ middleware
•MFi, Android™, and Bluetooth® audio frameworks
•μC/OS™, FreeRTOS™, and other popular RTOS kernels

Em này đã có chưa hả các bác???