hoi cách khai báo mảng trong atmega8

[daohuytien]

hơn 1 năm nay rồi, ngại quá. nay lại moi lên, các bác giúp em thêm nữa nha. vẫn là cái vụ lưu vào EEPROM.
em dùng codevisionavr : em muốn ghi 1 mảng có buff[800] ={......}; vào trong eeprom. như khai báo unsigned char eeprom buff[800]={......};
thì trong chuơng trình chính có sử dụng được mảng buff này không ?

[dtcn_112]

theo mình thì sử dụng nó như các biến bình thường có gì đâu, mình trước đây từng viết như vậy.

[daohuytien]

eeprom unsigned char  chucmung[208]= {
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xBE,0xFF,0xFF,0xFF,0xFF,0x3D,0xFF,0xFF,0xFB,0xEF,0xFF,0xFF,0xF7,
0xBE,0xFF,0xFF,0xFF,0xFF,0x3D,0xFF,0xFF,0xFD,0xDF,0xFF,0xFF,0xF7,
0xBE,0xC3,0x46,0x8D,0xDF,0x5D,0x86,0xEE,0xFD,0xD8,0x70,0xD3,0xF7,
0xBE,0xFD,0x3A,0x75,0xDF,0x5D,0x7A,0xEE,0xFE,0xB7,0xBF,0x4F,0xF7,
0x80,0xFD,0x7A,0xF6,0xBF,0x6D,0x7B,0x55,0xFF,0x77,0xBF,0x5F,0xF7,
0xBE,0xC1,0x7A,0xF6,0xBF,0x75,0x03,0x55,0xFF,0x70,0x30,0x5F,0xF7,
0xBE,0xBD,0x7A,0xF6,0xBF,0x75,0x7F,0x55,0xFF,0x77,0xEF,0x5F,0xFF,
0xBE,0xB9,0x7A,0xF7,0x7F,0x79,0x7B,0xBB,0xFF,0x77,0xAE,0x5F,0xF7,
0xBE,0xC5,0x06,0x0F,0x7F,0x79,0x87,0xBB,0xFF,0x78,0x71,0x5F,0xF7,
0xFF,0xFF,0x7E,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0x7E,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0x7E,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
};

mình khai báo như trên, trong chương trình có sử dụng đến mảng này mà không được.
ví dụ như xuất lần lượt 208 phần tử trong mảng ra Port C chẳng hạn.